MultiSync MT1035 Manuel d'utilisateur télécharger pdf (Page 5)

E-5

INTRODUCTION1

This section introduces you to your new MultiSync MT1035

(XGA) LCD Projector, provides a list of materials that comes

with your projector and describes the features and controls.

Congratulations On Your Purchase Of The

MultiSync

MT1035 LCD Projector

The MultiSync MT1035 is one of the very best LCD projec-

tors available today. The multiple LCD panels enable you to

project precise images up to 320 inches (812.8 cm) across

(measured diagonally) from your PC or Macintosh computer

(desktop or notebook), VCR, DVD player, document camera,

or even a laser disc player.

You can use the projector on a tabletop or cart, you can

permanently mount it on a ceiling*

, or you can use

MultiSync MT1035 LCD Projector to project images from

behind the screen. The remote control can be used wirelessly

or with a cable, and you can even use the remote control with

the built-in remote mouse receiver to operate the mouse on

your PC or Mac. But best of all, the MultiSync MT1035 is an

NEC LCD projector. That means you can depend on years of

reliable performance and crystal-clear presentations!

Features you’ll enjoy:

• Simple set up and operation.

• Hot air blown from the vents does not bother the audience

during your presentation since the vents are located on the

front.

• A high-performance 150 watt short arc high pressure lamp

that delivers 1300 ANSI lumens and an operating lamp life

is 2000 hours.

• A wireless remote control that operates the projector from

any angle.

• A laser pointer that' s built into the remote control.

• The power zoom control enables you to adjust the image

to be between 63.5 and 812.8 cm (measured diagonally).

• Keystone correction allows you to correct trapezoidal dis-

tortion so that the image is square.

• White balance control allows you to adjust the brightness

and contrast for each RGB color.

• You can choose between video modes depending on your

source: "normal" for a typical picture, "natural" for true

color reproduction, and "camera" for use with a document

camera or low APL picture.

• The optional MT Viewer kit allows you to start your

presentation even when a PC is not available at the site.

• The "image capture" enables you to use the entire picture

as a background image or to create slides (optional MT

Viewer required).

• An image can be projected from in front or behind a

screen, and the projector can even be installed on the

ceiling.

• NEC Technologies' exclusive AccuBlend™ intelligent

pixel blending technology - an extremely accurate image

compression technology - offers a crisp image with SXGA

(128021024) resolution*

. You can select any point on

the screen with the pointer and enlarge the selected area.

•

Supports most IBM VGA, SVGA, XGA, SXGA(with

AccuBlend)*

, Macintosh, or any other RGB signals within a

horizontal frequency range of 15.625 to 85 kHz and a vertical

frequency range of 50 to 85 Hz. This includes NTSC, PAL,

SECAM and NTSC4.43 standard video signals.

Note: Composite video standards are as follows:

NTSC: U.S. TV standard for video in U.S. and Canada.

PAL: TV standard used in western Europe.

SECAM: TV standard used in France and Eastern Europe.

NTSC4.43: TV standard used in Middle East countries.

1 2 3 4 5 6 7 8 9 10 ... 45 46

Commentaires sur ces manuels

Pas de commentaire

MultiSync MT1035 Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs MultiSync MT1035